ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: hollywood514 on December 26, 2010, 09:59:48 AM

Title: 91 suzuki samurai code 17
Post by: hollywood514 on December 26, 2010, 09:59:48 AM

91 suzuki samurai I put the fuse in and jumped the plug by the battery and got the light to blink 1 and then 7  which Ive been told is a 17. any help on what this is. As I said in the other post it has no spark at the coil. Thanks bob

Title: Re: 91 suzuki samurai code 17
Post by: Skyhiranger on December 26, 2010, 11:42:18 AM

Code 17 isn't a valid code.  Either you read it wrong or there is something really messed up.

Title: Re: 91 suzuki samurai code 17
Post by: hollywood514 on December 26, 2010, 12:12:38 PM

It would blink once then pause and then blink 7 times. And then in would keep repeating that. I hope I was jumping the  right 2 wires.

Title: Re: 91 suzuki samurai code 17
Post by: Skyhiranger on December 26, 2010, 12:20:14 PM

Is it maybe 71, instead of 17?  Because 71 is a valid code.  It is a test switch terminal error code.  Which means you have driven it at a speed above 25mph with the jumper in place.  Remove the jumper, when you are driving.

Title: Re: 91 suzuki samurai code 17
Post by: ebewley on December 27, 2010, 08:05:53 AM

There's a list of codes on our "Tech Specs" page which you can find right about in our header links...

http://www.zukiworld.com/main_departments_techspecs.htm (http://www.zukiworld.com/main_departments_techspecs.htm)

Good luck! -Eric

Title: Re: 91 suzuki samurai code 17
Post by: hollywood514 on December 27, 2010, 06:13:31 PM

Thanks I've got some used parts coming so I'll plug and play till it starts.