ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Model Specific Suzuki Forum => Suzuki Sidekick, Vitara, Geo Tracker (Gen. 1 Platform) 1989-1998 => Topic started by: Easyrider83 on December 28, 2010, 06:53:34 PM

Title: Needin info on solid axel conversion On tracker
Post by: Easyrider83 on December 28, 2010, 06:53:34 PM

I need info and pics of u have done I have a 93 model tracker thanks for the help

Title: Re: Needin info on solid axel conversion On tracker
Post by: beagle..t on December 29, 2010, 09:43:40 AM

check out the diy builds they have alot of good pics and info there

Title: Re: Needin info on solid axel conversion On tracker
Post by: Drone637 on December 29, 2010, 03:25:04 PM

What type of axle are you thinking of putting under the front end?

Title: Re: Needin info on solid axel conversion On tracker
Post by: Easyrider83 on December 29, 2010, 07:37:09 PM

Not really sure either yota or just a Sammy any suggestions

Title: Re: Needin info on solid axel conversion On tracker
Post by: Drone637 on December 30, 2010, 12:59:20 PM

Sammy will go on without to much of a problem, you just need to put on some wheel spacers so they are the same width.  If you go Toyota then I would swap both axles.  It really depends on what your planning on using it for.

How big of tires do you want to run?

Title: Re: Needin info on solid axel conversion On tracker
Post by: utahskibum on December 30, 2010, 06:45:01 PM

Low Range has all the parts for a complete swap- I'm doing t- case gears at the same time but mine is almost done. Should have some pics soon and I will be at Zukfari too.

Title: Re: Needin info on solid axel conversion On tracker
Post by: DaddyDave on January 05, 2011, 05:03:32 PM

Go to the General Forum. CALMINI just released their SAS kit for the 1st gens.

Title: Re: Needin info on solid axel conversion On tracker
Post by: trackermatt91 on January 27, 2011, 11:20:28 PM

going links or leafs?  leafs and samurai axle would be easiest, make some hangars for the front spacers to keep the width same front and rear
matt

Title: Re: Needin info on solid axel conversion On tracker
Post by: Easyrider83 on January 29, 2011, 02:47:22 PM

Thanks everyone I got her done today going to take her for a spin tonight

Title: Re: Needin info on solid axel conversion On tracker
Post by: Drone637 on January 29, 2011, 10:27:20 PM

Pic's or it didn't happen!  :)

Title: Re: Needin info on solid axel conversion On tracker
Post by: Easyrider83 on January 30, 2011, 02:40:22 PM

Haha I hear ya I'll try to get some up on here it did good though got to put some shock on it will beat you to death haha

Title: Re: Needin info on solid axel conversion On tracker
Post by: 803_93geotracker on January 31, 2011, 05:52:03 AM

he man just post on here people with trackers doing the straight axle swap what axles did you choose an have u put them in yet lmk thanks

Title: Re: Needin info on solid axel conversion On tracker
Post by: Easyrider83 on January 31, 2011, 03:06:54 PM

Ya man put the samurai axle it was the easiest one to do and the cheapest I'll try to have some pics up soon