ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: ender06 on January 01, 2011, 10:03:27 PM

Title: NEED: 1.6L 16valve HEAD and CAM
Post by: ender06 on January 01, 2011, 10:03:27 PM

I need a Head and cam guys. 1.6L 16 valve. Mine locked up!! Anyone got anything

Title: Re: NEED: 1.6L 16valve HEAD and CAM
Post by: Shadow on January 02, 2011, 06:42:52 AM

I have one laying around that I might want to get rid of. It needs to be rebuilt, and some rust on the cam from it being left outside :(.

Title: Re: NEED: 1.6L 16valve HEAD and CAM
Post by: ender06 on January 04, 2011, 06:58:02 PM

Looking for one in good shape. TTT

Title: Re: NEED: 1.6L 16valve HEAD and CAM
Post by: 4x4kritter2 on January 19, 2011, 06:47:39 PM

I think I have one on the bench at the shop. I'll check 2morrow. I'll be push'n snow till evening though. Has cam still in it ... do you need the distributor too? I'll have to see what there worth... unless you already know what you want to pay. It came off an engine with a rod knock'n so I know it's ok. I'm in east central Indiana 47354 zip if it helps on figure'n shipping. I'll get back to ya asap.

Title: Re: NEED: 1.6L 16valve HEAD and CAM
Post by: ender06 on January 19, 2011, 07:35:44 PM

Yeah kritter, let me know what you got. Im still in need and No i do not need the distributor. Thanks!!!

Title: Re: NEED: 1.6L 16valve HEAD and CAM
Post by: Toy Box on January 20, 2011, 07:17:41 AM

I got one in Salem OR.

Title: Re: NEED: 1.6L 16valve HEAD and CAM
Post by: ender06 on February 18, 2011, 02:45:27 PM

bump for COMPLETE head

Title: Re: NEED: 1.6L 16valve HEAD and CAM
Post by: SIDEKICK65 on February 19, 2011, 02:27:34 AM

I have a good complete complete 16 valve head of you still need one?

Title: Re: NEED: 1.6L 16valve HEAD and CAM
Post by: ender06 on February 19, 2011, 09:22:04 AM

yes!!!! PM sent

Title: Re: NEED: 1.6L 16valve HEAD and CAM
Post by: jayxj71 on February 24, 2011, 01:06:40 PM

still need one?

Title: Re: NEED: 1.6L 16valve HEAD and CAM
Post by: ender06 on February 24, 2011, 07:34:04 PM

Yes for the right price. Pm me