ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Jluck on January 12, 2011, 10:16:32 AM

Title: sidekick pinout sheet? anybody have one??
Post by: Jluck on January 12, 2011, 10:16:32 AM

I'm looking for a pin out sheet for ecm (or whatever 'ya prefer to call the engine management computer) Im working with a 92 jx 16v 4door kick and need the pin sheet for the comp. thanks

Title: Re: sidekick pinout sheet? anybody have one??
Post by: BRD HNTR on January 12, 2011, 12:20:16 PM

I have a 93 FSM (at home), and it does not have a direct pin out.  I went through the electrical pages to get what I needed, as it is organized by controls ie charging, lights, brakes etc. 
You should only be needing a few of the pins for power, memory power, rpm, oil pressue (light), temp guage, starter signal, ignition, GROUND.  Off top of my head, I will check my wiring lists as to where I routed those to off the new ECM, this evening.
If you need a VSS signal for the ECM, you can get an adapter from the speedo cable to VSS, but the OBD I  VSS signal from some speedo's are not compatible with OBD II VSS signals (which is probably what your Audi is).

Title: Re: sidekick pinout sheet? anybody have one??
Post by: Rhinoman on January 12, 2011, 02:25:57 PM

http://www.btinternet.com/~j_holland/docs/wiring-diagram-g16b.pdf (http://www.btinternet.com/~j_holland/docs/wiring-diagram-g16b.pdf)

Title: Re: sidekick pinout sheet? anybody have one??
Post by: bentparts on January 12, 2011, 02:54:59 PM

Rhinoman to the rescue! ;D

Title: Re: sidekick pinout sheet? anybody have one??
Post by: Jluck on January 12, 2011, 03:15:10 PM

thank you Rhinoman!!!  TP up!

Title: Re: sidekick pinout sheet? anybody have one??
Post by: BRD HNTR on January 12, 2011, 04:46:33 PM

That is much easier than the way I did it.

Title: Re: sidekick pinout sheet? anybody have one??
Post by: ack on January 12, 2011, 06:16:33 PM

Too late to mention this I guess, but here is a detailed TracKick wiring document by Warbird created for building a Samurai 1.6 wiring harness:

http://www.acksfaq.com/16wiringharness.htm (http://www.acksfaq.com/16wiringharness.htm)

It has lots of detailed info about all the electrical plugs - including the ECM!

I hope that this helps!

Title: Re: sidekick pinout sheet? anybody have one??
Post by: Jluck on January 13, 2011, 11:24:07 PM

wow thanks ack! lots of great info.

Title: Re: sidekick pinout sheet? anybody have one??
Post by: BRD HNTR on January 14, 2011, 07:49:22 AM

Quote from: ack on January 12, 2011, 06:16:33 PM

Too late to mention this I guess, but here is a detailed TracKick wiring document by Warbird created for building a Samurai 1.6 wiring harness:

[url]http://www.acksfaq.com/16wiringharness.htm[/url] ([url]http://www.acksfaq.com/16wiringharness.htm[/url])

It has lots of detailed info about all the electrical plugs - including the ECM!

I hope that this helps!

VERY GOOD information.  I have bookmarked it for next time.  Thanks for all the information you have gathered and shared.