ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: cnodes on January 20, 2011, 07:15:08 PM

Title: Rear Seat
Post by: cnodes on January 20, 2011, 07:15:08 PM

I have a 1994 Sami and I'm brand new to the suzuki world.  I have a rear seat I've purchased, but my sami didn't come factory with a rear seat.  I've also purchased the rear seat bracket w/ bolts but have a few questions.  What would be the best way to mount this seat in the sami? Meaning how do I know exactly where to drill holes for the mount?  And is there a difference in the type of "male" seat belts for the rear seat from the different years or will all years fit?  The seat came with the female ends already on the seat.  Thanks,
Ole Sarge

Title: Re: Rear Seat
Post by: ecoast on January 22, 2011, 04:30:03 AM

holes are there. look carefully, and measure.

Seat belts all compatable

Title: Re: Rear Seat
Post by: cnodes on January 23, 2011, 07:19:38 PM

Thanks for the advice, at least I have a clue now.

Title: Re: Rear Seat
Post by: Skyhiranger on January 24, 2011, 03:56:12 PM

In the samurais that didn't come stock with a rear seat the nuts are there, but you have to drill the holes in the floor, to get to them.  Look under the samurai for the nuts and you should be able to use a punch to mark the holes from the underside, then drill them from the topside.

Title: Re: Rear Seat
Post by: DoorKicker on February 21, 2011, 08:41:18 PM

Quote from: ecoast on January 22, 2011, 04:30:03 AM

holes are there. look carefully, and measure.

Seat belts all compatable

not all seat belts are compatable. I found that out the hard way....