ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Model Specific Suzuki Forum => Suzuki Sidekick, Vitara, Geo Tracker (Gen. 1 Platform) 1989-1998 => Topic started by: Easyrider83 on January 21, 2011, 12:51:38 PM

Title: ring and pinion question
Post by: Easyrider83 on January 21, 2011, 12:51:38 PM

ive got a spool in the rear on one of my trackers and im wanting to put it i the front of another tracker i got will it work

Title: Re: ring and pinion question
Post by: Drone637 on January 26, 2011, 05:34:36 PM

If you have a 96 and up Tracker, yes.  If not then no, you need the larger splines up front.

Title: Re: ring and pinion question
Post by: Easyrider83 on February 09, 2011, 02:01:15 PM

Ok another question are the ring and pinion the same size front and rear on a 94 and down I know the carriers are different but they look the same

Title: Re: ring and pinion question
Post by: Drone637 on February 10, 2011, 12:43:17 PM

You will probably want to swap over to a Samurai third member in order to get the steel diff.  The main difference is the 96 and up have the larger splines that come with the mini-spool.  It's sort of like how you have to switch to heavy duty axles to run a mini-spool up front on a Samurai.

Title: Re: ring and pinion question
Post by: Skyhiranger on February 10, 2011, 02:29:53 PM

Quote from: Easyrider83 on February 09, 2011, 02:01:15 PM

Ok another question are the ring and pinion the same size front and rear on a 94 and down I know the carriers are different but they look the same

The ring and pinions are not the same size front to rear.

Title: Re: ring and pinion question
Post by: Drone637 on February 11, 2011, 06:09:42 PM

Quote from: Skyhiranger on February 10, 2011, 02:29:53 PM

The ring and pinions are not the same size front to rear.

Oh, yea.  That as well.  I was just thinking about the mini-spool.  :)