ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: brenzuk on February 03, 2011, 09:24:08 AM

Title: head gasket
Post by: brenzuk on February 03, 2011, 09:24:08 AM

Hey guys, are the 16v and 8v head gaskets the same? Never been in a 16v head, hope its tot TOO bad.

Title: Re: head gasket
Post by: wildgoody on February 03, 2011, 11:15:18 AM

Yes, but pay close attention to the oil feed hole at the front of the block, and make sure the
oil hole in the gasket lines up or you will smoke the cam and the head, junk in 60 seconds

Wild

Title: Re: head gasket
Post by: brenzuk on February 03, 2011, 12:14:49 PM

Thanks wild. I'll watch for the oil hole.

Title: Re: head gasket
Post by: jawman on February 03, 2011, 07:34:24 PM

most of the gaskets dont have a FRONT marking eaither. just look at it a while and flip it back and forth and choose the best fit.