ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: TheDuke33 on February 03, 2011, 02:23:28 PM

Title: knuckle "king pin bearings"
Post by: TheDuke33 on February 03, 2011, 02:23:28 PM

whats the easiest way to knock out the "king pin" races from the axle housing....  i have new ones to install.. 

Title: Re: knuckle "king pin bearings"
Post by: Skyhiranger on February 04, 2011, 05:43:46 PM

Hammer and a long punch.