ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: lee183 on February 12, 2011, 01:35:36 PM

Title: Smaurai trasnsmission
Post by: lee183 on February 12, 2011, 01:35:36 PM

My 86 sammy engine runs good but when i put it in gear and easy off the clutch it wont move but a few feet no matter how much i rev the engine what is the problem?

Title: Re: Smaurai trasnsmission
Post by: c3006 on February 12, 2011, 03:35:26 PM

Sounds like you may need a new clutch plate. You will probably have to give attention to your Flywheel ,pressure plate and throwout bearing while you are at it.   Good luck   c

Title: Re: Smaurai trasnsmission
Post by: lee183 on February 13, 2011, 03:33:55 PM

When i rebuilt the engine i got a clutch plate kit and installed it.

Title: Re: Smaurai trasnsmission
Post by: wildgoody on February 13, 2011, 09:54:56 PM

Something might of come loose, pressure plate bolts??? or you might of
got cheep junk parts that broke or let loose in there

Wild