ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: Riverrat on February 13, 2011, 07:42:13 AM
-
Guys!
I need an 1.3 engine!
Any suggestions for a reliable vender?
Thanks!!
Riverrat
-
Lee built LLC he was the builder for sammy pro till he opened his own shop http://zukiengines.com/ (http://zukiengines.com/)
-
Lee built LLC he was the builder for sammy pro till he opened his own shop [url]http://zukiengines.com/[/url] ([url]http://zukiengines.com/[/url])
Thanks Fordguy!!
Riverrat
-
That's why we are here
-
I have a used 1.3L from an 87 Samurai. Take a look at
http://www.zukiworld.com/forum/classified-ads/stock-1-3l-carbureted-from-87-samurai/ (http://www.zukiworld.com/forum/classified-ads/stock-1-3l-carbureted-from-87-samurai/)
-
I have a used 1.3L from an 87 Samurai. Take a look at
[url]http://www.zukiworld.com/forum/classified-ads/stock-1-3l-carbureted-from-87-samurai/[/url] ([url]http://www.zukiworld.com/forum/classified-ads/stock-1-3l-carbureted-from-87-samurai/[/url])
Thanks!!
I live about as far east as you can go in south georgia, so shipping is out of question.
There are a couple of used engines around here that I have access to, and I can take one of these
to a machine shop for rebuild. I would rather buy a fresh rebuilt engine, & even pay the shipping from a
reliable builder!
Thanks!!
Riverrat
-
If you have the $$, wwwsamuraisalvage.com $2500=100hp 1.3L long block with weber carb and header, or $1999 -header and carb, it comes with free UPS shipping for the lower 48 states. I've never bought any thing from them but I think others on here have.
-
Thanks!!
I'll check them out!
Regards!
Jimmy
-
I have a used 1.3L from an 87 Samurai. Take a look at
[url]http://www.zukiworld.com/forum/classified-ads/stock-1-3l-carbureted-from-87-samurai/[/url] ([url]http://www.zukiworld.com/forum/classified-ads/stock-1-3l-carbureted-from-87-samurai/[/url])
Thanks!!
I live about as far east as you can go in south georgia, so shipping is out of question.
There are a couple of used engines around here that I have access to, and I can take one of these
to a machine shop for rebuild. I would rather buy a fresh rebuilt engine, & even pay the shipping from a
reliable builder!
Thanks!!
Riverrat
I'll be in Petersburge VA, early April. I'd be willing to bring it that far if ya wanna meet up?
-
Have you ever heard of Jasper Engines. They are a major engine rebuilder. Nation wide.
-
-
Thanks for the offer, but that would be a little over 500 mi. drive.
When I change engines, I would like it to be fresh!
Thanks
Riverrat!
-
Have you ever heard of Jasper Engines. They are a major engine rebuilder. Nation wide.
THANKS!
I'll check them out!
Riverrat