ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: jayxj71 on February 24, 2011, 12:55:55 PM
-
I have 2 complete 1997 trackers I am parting out, ( minus 1 engine) , both are 5 speed 4wd, also have some 92 tracker parts and some misc. sammy parts for sale, way too much to list, let me know what you need and are willing to pay, rather not ship the bigger items, but possibly will
tons of stuff still available...
set of 4;62 gears...$75 ea
set of 5;12 gears...$75 ea
driveshafts $20 ea
axles
doors
fenders
interior parts
power steering pumps..$40 ea
steering columns
airbags $35 ea
door mirrors...$15 ea
power steering boxes...$45 ea
5-sp trannys....$75 ea w/transfer case $125
sammy stuff left:
complete 1991 front axle, stock gears, hub to hub, calipers, rotors, brakes, steering etc. $200
pair of doors from a 91, good condition, with glass $100 pr.
rear stock 3rd, from 91, $75
complete steering column with multifunction switches and key $50
int shaft for 91, $25
grille from 91, $35
5 sp tranny from an 88 $75
1.3 head from 88, needs rebuild, $30
1.3 intake manifold, 88 (bare) $40
lots of other small misc. stuff
-
Nobody needs anything? ??? :o
-
Not real climactic but I need a single brake line for the drivers side front from a non-abs rig. And are those 26 spline fronts?
-
Not real climactic but I need a single brake line for the drivers side front from a non-abs rig. And are those 26 spline fronts?
the rubber brake line i assume?, and not sure the spline count, their both 97's
-
Nope, the hard line from master to inner fender (that connects to the hose) must be non-abs. I don't know if any were by then.
-
Nope, the hard line from master to inner fender (that connects to the hose) must be non-abs. I don't know if any were by then.
It would cost more to ship that line then just going to an autoparts store and buying a line and bending it
-
I gotta have factory fit. Otherwise it would drive me nuts.but I agree on shipping it probaly not worth it. But it's still cheaper than going to 10 wrecking yards looking for a perfect one.
-
I gotta have factory fit. Otherwise it would drive me nuts.but I agree on shipping it probaly not worth it. But it's still cheaper than going to 10 wrecking yards looking for a perfect one.
ill look tomorrow at how big it is and how much to ship, already have all those lines off the black one
-
Where are you located I'm in so cal and looking for motor and tranny combo for a Suzuki sidekick. what is the milage and status of the motors
-
Where are you located I'm in so cal and looking for motor and tranny combo for a Suzuki sidekick. what is the milage and status of the motors
you couldnt be any further away, i'm in massachusetts, still have the 16 valve 1.6 and the 5 sp. tranny from the blue one 116k mi.
-
how much to ship license plate lights to 97487
I have 1 left from tracker, $17 to your door
-
Do you have a ECM ,tps, or map sensor and if so how much?
Thanks
Bill Snyder
-
Do you have a ECM ,tps, or map sensor and if so how much?
Thanks
Bill Snyder
probally, what year? auto or 5 sp?, makes a differance
-
I need a 5:13???? anything?
-
91 sammy 5 speed
thanks
Bill Snyder
-
I need a 5:13???? anything?
front? rear?, both?
-
looking for manual window regulator driver side
looking for rubber shift boots for tranny and transfer case
looking for suzuki front grill emblem
all need to fit a 90 tracker
-
I'm interested in parts from a '97.
How much for:
1. front and rear 5.12 third members
2. the driver's side inner axle shaft
3. passenger side CV shaft
Or maybe, just the whole front hog's head instead of the shafts and the front third member?
Thanks!
If you can get it, shipping to 83709?
-
I'm interested in parts from a '97.
How much for:
1. front and rear 5.12 third members
2. the driver's side inner axle shaft
3. passenger side CV shaft
Or maybe, just the whole front hog's head instead of the shafts and the front third member?
Thanks!
If you can get it, shipping to 83709?
$500 for all of it shipped to you, the front housing, axles, front & rear thirds....
-
Ok, I will get in touch with you in a day or two and let you know for sure. But it sounds fair.
-
Ok, I will get in touch with you in a day or two and let you know for sure. But it sounds fair.
ok, just let me know...... Jay
-
How about a front third with 5:13's? Pre 95? Shipped to 84074?
-
How about a front third with 5:13's? Pre 95? Shipped to 84074?
only have the 97's
-
How about the hubs, manual or auto it won't matter.
Also do you have a good dash bezel?
Thanks.
-
How about the hubs, manual or auto it won't matter.
Also do you have a good dash bezel?
Thanks.
all out of hubs, which bezel are you reffering to?
-
I don't know if they are different in the years but the one that goes around the radio, vents, ash tray, and such. Mine is a 94 if it matters.
-
I don't know if they are different in the years but the one that goes around the radio, vents, ash tray, and such. Mine is a 94 if it matters.
you need pre 96 bezel, 96-98 are different and i dont have any of those left, sorry
-
You have a PM.
-
You have a PM.
pm returned
-
How about left and right side headlight modules shipped to 84790?
-
How about left and right side headlight modules shipped to 84790?
headlight modules? can you be more specific?
-
PMed you!
-
How about left and right side headlight modules shipped to 84790?
headlight modules? can you be more specific?
The entire housing with turn signals and bulbs. Actually, I could use my existing turn signals and bulbs, but I have major rock chips in the headlight lenses.
Gil
-
bump
-
Do you happen to have the rear bow for a softtop PRE 95 Tracker? Mine is a 90. I need the bow that has the "legs" that sit on the area by the upper part of the rear seatbelts.
-
I need the ECM possibly for the 92 tracker if it's auto
-
Do you happen to have the rear bow for a softtop PRE 95 Tracker? Mine is a 90. I need the bow that has the "legs" that sit on the area by the upper part of the rear seatbelts.
yea I have that rear bow from the 92, $20 plus shipping
-
I need the ECM possibly for the 92 tracker if it's auto
sorry, ecm from the 92 is already sold
-
Do you happen to have the rear bow for a softtop PRE 95 Tracker? Mine is a 90. I need the bow that has the "legs" that sit on the area by the upper part of the rear seatbelts.
yea I have that rear bow from the 92, $20 plus shipping
40322 for the shipping quote, please.
-
How about a good fan/w clutch and shroud? I'm in Jersey, 08029 so shipping shouldn't be too outrageous.
-
How about a good fan/w clutch and shroud? I'm in Jersey, 08029 so shipping shouldn't be too outrageous.
sure, a/c or non a/c shroud?, fan clutch and shroud shipped to you $45
-
driver side head light how much?
-
driver side head light how much?
$40 shipped
-
bump......still got all this stuff.......all gotta go quick, make offers
-
Any of those two have 16" wheels?
-
need a front axle for a 95 sidekick have anything? need housing cv shafts the whole works.
-
Any of those two have 16" wheels?
sorry, but no
-
need a front axle for a 95 sidekick have anything? need housing cv shafts the whole works.
have all that from a 92, 4:62 gears, complete front end sitting on my floor, gotta go, make offer
-
Not sure what gear ratio mine is im assuming it is stock axle and gears but its a 2 door 5 speed. I just got the kick about three weeks ago so i really do not know a whole lot about it. Where are you Located?
-
Not sure what gear ratio mine is im assuming it is stock axle and gears but its a 2 door 5 speed. I just got the kick about three weeks ago so i really do not know a whole lot about it. Where are you Located?
autos should be 4;62 gears, 5-sp should be 5;12gears, i have both complete setups, im in hubbardston, Ma.
-
do you have a 5 speed transmission for the sammy?
Mine's a 86 do you have one that will fit that?
-
How about both interior door handles and a drivers side mirror. Zip. 28752 Western N.Carolina, I do have a paypal acct.
-
do you have a 5 speed transmission for the sammy?
Mine's a 86 do you have one that will fit that?
pm sent
-
How about both interior door handles and a drivers side mirror. Zip. 28752 Western N.Carolina, I do have a paypal acct.
pm sent
-
bump
-
looking for the shaft that conects the steering box to the steering wheel
-
looking for the shaft that conects the steering box to the steering wheel
$45 shipped
-
Transfer case with or w/out gears for 87-88 sammy??
Gary
-
looking for the shaft that conects the steering box to the steering wheel
$45 shipped
this is for a NONE power steering car right? also can you send the bolts and boots with it?
-
Transfer case with or w/out gears for 87-88 sammy??
Gary
nothing, sorry
-
looking for the shaft that conects the steering box to the steering wheel
$45 shipped
this is for a NONE power steering car right? also can you send the bolts and boots with it?
all are power steering shafts....should all be the same, can send extra parts wanted, PM me
-
can you send me a pic please
-
I have a 92 tracker 4x4 soft top, in need of the tailgate latch cover , one rear clip for the soft top, passenger side clip for the rear side bar, the fuel lines to and from the fuel filter (just the hoses) , dome light cover , radio with cd player , also if you have a good soft top or a hard top front part over the driver and passenger seats.
Thanks Tony,
vesco99|removethispart|@yahoo.com
-
bump
-
can you send me a pic please
-
looking for all of the soft top hardware and bows for a 98 shipped to 07066
thanks
-
looking for all of the soft top hardware and bows for a 98 shipped to 07066
thanks
your talkin bout everything?, the front rail, 2 bows, front hold down, clips, rails, etc...everything needed less a soft top right?, $200 shipped
-
pm me a price on the 2 bolts that hold on the steering shaft
-
Got a set of manual hubs? If so how much?
-
looking for the shaft that conects the steering box to the steering wheel
$45 shipped
this is for a NONE power steering car right? also can you send the bolts and boots with it?
all are power steering shafts....should all be the same, can send extra parts wanted, PM me
FYI, power steering shafts are shorter than manual steering shafts.
-
Got a set of manual hubs? If so how much?
sorry, no hubs left
-
hey do you have the bolts for that steering shaft? if so ill take them pm me please
-
Need 97 evap canister and tank pressure sensor!
-
Need 97 evap canister and tank pressure sensor!
those i have....could you send me a pic of the pressure sensor though? not sure exactally what that is
-
Need window regulators drivers side at lesast 2 if you have 'em. Also noticed on the black on how much the rims and tires and where you located???
Thanks, Jack
-
Need window regulators drivers side at lesast 2 if you have 'em. Also noticed on the black on how much the rims and tires and where you located???
Thanks, Jack
sorry, rims and tires are sold, window regs are sold, most of the parts went on e bay, not much left
-
Howa' bout that 88' tranny, still got it......?
-
how about a tailgate - prefer light blue, must fit my '92 tracker (not sure if '97 is different)
I'm in philly - i would be willing to pay for shipping (and a packaging fee).
-
WTB vbelt crank pully w/power steering. going onto a 96 but i thinkn 97 is the same
Also may be interested in the dizzy assymbly including the housing. seen some 1.6 motors with cam sensor in place of dizzy though.
-
Sami rear 3rd to 40342?