ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 92Sidekick4x4 on June 04, 2004, 07:23:05 AM

Title: Size Of Bolts
Post by: 92Sidekick4x4 on June 04, 2004, 07:23:05 AM

Hey everyone,

i am building strut spacers for my kick what i need to know is the size of the bolts that i will need for the struts because i am going to be drilling the holes in about an hour for the spacers. Do u guys know the 3 bolts that i am talking about? there for the struts, any help is appricated. :)

Title: Re: Size Of Bolts
Post by: Crabzuki on June 04, 2004, 01:14:26 PM

Spencer: Just because I worked with them today doing the body lift. The bolts I used with the calmini lift were 20 mm long and used 10 mm nuts.

Title: Re: Size Of Bolts
Post by: explosivo on June 04, 2004, 01:36:04 PM

Well, obviously bolts that will fit in the holes ::) :P

Title: Re: Size Of Bolts
Post by: wildgoody on June 04, 2004, 05:21:28 PM

I used 5/16ths coarse thread SAE bolts
Grade 5 or 8 and graded nuts with washers
20mm or about 3/4 to 1" long is good
1 inchers are alittle easier to bolt up when
you got your hands full putting all this back
together.

Wild