ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: horseman on March 02, 2011, 05:52:51 PM
-
I just got a 87 Samurai LWB (entirely stock). Took it to work today and couldn't go more than 80km/h on the highway. There was a wind so that didn't help, but I also noticed a block welded on the back of the gas petal to prevent me from pushing it down too far. Is that a stock item or did someone before me weld that on to prevent having any fun? I would like to get more power out of it. After looking on the web site here and other Zuki sites I should be able to get more speed than that. I also found out that the rear seat belts are missing. Any photos of where I should bolt new ones would be greatly apprieciated. I am thinking of maybe fabricating some shoulder belts for the back so if anyone has done that on a long wheel base sami I would also really like to see some pictures.
-
For the rear seat belts you want to slide under the vehicle, there will be nuts there where the seat belts will bolt through. Just use a tap to mark the spot and drill it out from the top side.
-
Thanks, I think I have found the spot now. Just got to wait for the seat belts to arrive.
-
1.6 16v swap is easy and lots more power i have a 16v 32" bfg's and a 6.5-1 tc i do 80mph all the time
-
I will be keeping a look out for a 1.6l engine. As far as new gears in the transfer case. How much does that cost, and where is the cheapest place to get them from?
-
what part of the world are you in?
-
I live in Alberta, Canada. More specific south eastern Alberta.
-
Low Range Off Road is a great place to browse for items as they have a well put together site. You might check with Trail Tough, as they have sales on gears all of the time.
Not sure about the shipping cost to Canada though.