ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: CurtisA on March 03, 2011, 06:26:00 AM

Title: Camshaft Cap Alignment Dowels
Post by: CurtisA on March 03, 2011, 06:26:00 AM

So..... I had the head on my 98 tracker rebuilt and when i pulled the camshaft to install the head back onto the engine, i noticed that one of the alignment dowels was missing from the carrier cap, and 2 were pretty mangled from when the shop put the cam back in pretty carelessly I'd say (it wasn't torqued down so i'm not too worried about camshaft damage)... just wondering if anybody knows where i could get a few of these little things, thanks

Title: Re: Camshaft Cap Alignment Dowels
Post by: wildgoody on March 03, 2011, 08:07:04 AM

A good autoparts store with a Doorman (brand) selection of hardware
should be able to get you what you need, just take a cap in for
size and sort through the alignment dowels

Wild