ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: jtracker on June 03, 2004, 03:48:50 PM
-
How does the rear axle shafts come out we can't figure out how to get them out >:(??????? Please HELP!!!!!!!!! Trying to get them out tonight if anyone is on here this late!!!!!!!!!  Any Help would be appreciated!!!!!! Thanks,
                                        Justin
-
their are 4 bolts (12MM i think) on the backing plate(near the shock) that needs to be taken out. the shafts come out hard so a slide hammer will be need. if you don't have a slid hammer, a getto way of doing it is put the drum on backwords and smack it with a RUBBER hammer. you also have to take one od the springs off the brakes to get the shafts out. hope i helped
stu
-
Thanks alot!!!!!! ;D We already had the bolts out but we thought it should come out easier than that!! We just got it out thanks again!!! Justin
-
Please HELP!!!!!!!!! Trying to get them out tonight if anyone is on here this late!!!!!!!!! ÂÂ
I have finals this week and next week so sleeping is kinda out of the queston. any other late night quesions are welcome. :)
stu
-
Stu, Good luck on the finals ;)
Zig
-
thanks zig, i will need it.
stu