ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: Jluck on March 20, 2011, 12:26:12 AM
-
whatcha need? I might have it. I have parts and pieces from four kicks out here and am prepping to sell my house.
couple things off the top of my head.
16v motor. ugly, corroded, but was promised to be a great motor. take your chances......100 bucks <will part>
A few sets of 5.12's front& and rears (all pre 96) 75 bucks per cog
some decent interior pieces (trim)($?), tilt wheel column with key. 50 bucks.
gauge clusters. 40
green doors 30 ea.
short block core (was over-heated) but was running. 50
more.....ask.
all items near Corvallis Oregon and shipping additional
-
ok,..just found out my 5-speed is trashed and my rear end is howling...so ill need a rear 512 third and a 5-speed trans...you got one?
-
I know I have the rear third. the last 5-speed I have has the bell housing removed and tail housing removed so its just the actual transmission gear box. if you want to mess with it I will give it to you cheap.
-
I know I have the rear third. the last 5-speed I have has the bell housing removed and tail housing removed so its just the actual transmission gear box. if you want to mess with it I will give it to you cheap.
cool,..id be down for a rear third...have to pass on the tranny that you got,..maybe i can find a trans between here and your place to make the trip worth while...or if drew or jason or someone else comes your way i could get it from them...anyways...save one for me
-
If your not in a hurry I'd be happy to bring that third up to u. If u come to trask this weekend maybe you could get it then, or have u already got your truck torn apart? Either way just let me know.
-
How much for both front calipers w/brackets and rotors?
-
Very clean console with cupholders and opening door on top?
Thanks,
Erik in Portland
-
How much for both front calipers w/brackets and rotors?
50 + shipping
Very clean console with cupholders and opening door on top?
Thanks,
Erik in Portland
man I wish I had about 1,000 of these! go to the dealer there only 45'ish new! and very clean.
-
Very clean console with cupholders and opening door on top?
Thanks,
Erik in Portland
funny guy..... :laugh: :laugh: :laugh:
-
What model had the one with the opening door, rear ashtray and two cup holders?
Consoles are only 45ish NEW? Really?
Thanks for the info, I will call tomorrow and see if they are still available.
Erik in Portland
-
What model had the one with the opening door, rear ashtray and two cup holders?
Consoles are only 45ish NEW? Really?
Thanks for the info, I will call tomorrow and see if they are still available.
Erik in Portland
I have found them in both two doors and four doors. just have to check with parts guy. I know one person that just ordered one last week.
-
If your not in a hurry I'd be happy to bring that third up to u. If u come to trask this weekend maybe you could get it then, or have u already got your truck torn apart? Either way just let me know.
drew...that would be cool,..except my tracker is down due to the trans..although i could meet up with ya somewhere in my truck...definitly not wheeling my truck!!!...lol
-
What model had the one with the opening door, rear ashtray and two cup holders?
Consoles are only 45ish NEW? Really?
Thanks for the info, I will call tomorrow and see if they are still available.
Erik in Portland
You will want to look at a '96 - '98 sidekick model for the cup holder center console. I just bought one from Duncan at Power Suzuki in Salem, he gives all Mid Valley Crawlers a discount (I think it's 20%) it might be worth the time to call and talk to him. The $45 - $50 dollar price was for just the big main plastic console, all the little parts like clips, doors, ashtray all have to be ordered separately. Duncan is a really nice guy and has been very willing to look things up and let me look through his parts books to compare different years and then getting a discount makes it even that much better!!! Mine isn't here yet and I know that he has the part numbers that I ordered written down in a binder he keeps on his desk, you might just ask him to match or verify that it is the same number that I'm getting, he might know me as Andrew because that is what's on my credit card :0) Good luck!!
-
drew...that would be cool,..except my tracker is down due to the trans..although i could meet up with ya somewhere in my truck...definitely not wheeling my truck!!!...lol
OK, make the arrangements with Jared and I'll try and get over there when I can and then I'll let you know the next time I'm in P-town. PM me your phone number, I don't think I have it from last time.
-
I called the Zuki place in Portland today and he said the 96 was the only one with cupholders visible in the pictures he looked at, 94-95 didnt have them in the pics he said. He quoted $93 for the main part only and they are out of stock at all warehouses in the US so it would come from Japan and could take a couple of months. It was available in grey but the opening door on top was only available in black. Guess I will keep looking. If anybody wants one of the cupholder consoles without the door on top I have a pretty clean one and beat one with the door on top, either for $25 shipped. Pics available.
Thanks,
Erik in portland
-
Give Duncan at power Suzuki in Salem a shot. A good parts guy is worth his weight in gold!
-
I need the 2 vacuum sensor/switches attached to the front of the upper intake. They are part of the vapor system I think.
-
Can I buy your tilt stearing? Does it have CC on that column? I would also like to buy drivers side rear door handle, drivers side plastic pice that goes on the front of the wheel well on the door jam. If Dave wants to get that engine from you I could bring a truck and bring it as far as Dallas or Salem when I get over there for the column and Travis's stuff.
-
If you still have the engine I'll take it. is it complete? can you give me some more more detail about it if you have it.
Hope to hear from ya' soon!
-Joel
-
I need the 2 vacuum sensor/switches attached to the front of the upper intake. They are part of the vapor system I think.
the only ones I have are on the crusty motor so usability unknown. let me try to find you some good ones.
Can I buy your tilt stearing? Does it have CC on that column? I would also like to buy drivers side rear door handle, drivers side plastic pice that goes on the front of the wheel well on the door jam. If Dave wants to get that engine from you I could bring a truck and bring it as far as Dallas or Salem when I get over there for the column and Travis's stuff.
I will sell you the one from the green parts rig (but its missing the horn button :P) and it does have cruse. how bout 50 for all you need?
and haven't heard from Dave?
If you still have the engine I'll take it. is it complete? can you give me some more more detail about it if you have it.
Hope to hear from ya' soon!
-Joel
I have a guy interested but no money has hit my PayPal yet......I will know by Saturday afternoon.
-
Engine is sold.
-
Do you have any headlights? I need both sides on a '97 Sidekick.
-
no real nice ones. I have a couple leaker's. i'm keeping the best ones.
-
I'm looking for rear brake parts for a 1997 Geo Tracker 4x4 4 door. I need the rear Brake adjusters and related parts, as well as the Emergency brake levers (Inside the drum) for both sides. Do you have these parts? and if so, how much plus shipping to 48430?
Thanks!
-
How much for both front calipers w/brackets and rotors?
50 + shipping
Very clean console with cupholders and opening door on top?
Thanks,
Erik in Portland
man I wish I had about 1,000 of these! go to the dealer there only 45'ish new! and very clean.
I want the brakes and brackets and rotors.
they arent frozen correct?
can you provide pics please?
any idea on cost shipped to NYC 10463?
thanx
-
so what is a fair price on that drivers side mirror?
-
All I have is a red one and a 20 would make it worth walking out to it I reckon. And I probably can get it close to you.
And the Front brakes. I think I can ship it all for 20
And the rear brake stuff. 30 shipping included.
-
I'll take it for $20
-
K, I will double check it for condition and operation Friday (day off). Paypal?
-
pay pal works send me email address
-
Let me check it out then I will send my info
-
I felt like santa delivering all your parts today!!! To bad I didn't know about the mirror, could have thrown that in the sleigh as well!!!
-
Oh, do you have a cam for a 16v? I thought I had one with my old cracked head but I can't find it anywhere.
-
yep I did just find one.
pm me for details on who what where. k
and I do appreciate you delivering that stuff BTW. I know I forgot to mention it yesterday.(felt like a ass)
-
So I got a PM from Beastly and I'm not sure how but he knew that I had an old head and wanted my old cam, I can't find my old cam but had aleready told him I had one so now I'm trying to help him find one. He will probably be getting in touch with you about getting that cam and I can deliver it.
-
thanks jared, and drew for the delivery
-
anytime. lets just hope it all works out good for you.