ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 94kickSSW on June 01, 2004, 02:39:53 AM
-
hey, it's my first post... ;D and thanks for all the info. just wondering where about in your trackicks ya'll put your cb's? pics would be great also. thanks again.
-
I mounted mine on the back of my cup holders, you cant use the ash tray anymore but i don't use that anyway.
-
I put it under the steering wheel. (http://members.home.nl/ed-oorklep/images/Fotos/Fotos_techniek%20003.jpg) not that obvious to see but it's there :)
-
This is on a ZUK but may give you some ideas,simple ,strong,easy to access.(http://www.kielbassa.com/pictures/interior003.jpg)
Later MUTANT ZUK
-
(http://images.cardomain.com/member_images/2/web/302000-302999/302365_153_full.jpg)
(http://images.cardomain.com/member_images/2/web/302000-302999/302365_154_full.jpg)
-
(http://img43.photobucket.com/albums/v133/RockSolid4X4/Tracker/cb1.jpg)
(http://img43.photobucket.com/albums/v133/RockSolid4X4/Tracker/antenna.jpg)
-
when i get one i am going to mount it to the trans tunnel..for me the CB on the dash right there gets in the way of my knee plus its kinda tedious to watch wha im doing and turn the volume down because theres some yaho that decided to be an idiot
-
([url]http://img43.photobucket.com/albums/v133/RockSolid4X4/Tracker/cb1.jpg[/url])
([url]http://img43.photobucket.com/albums/v133/RockSolid4X4/Tracker/antenna.jpg[/url])
Do you have anymore pictures of your antenna mount?
-
I mounted mine on the back of my cup holders, you cant use the ash tray anymore but i don't use that anyway.
cup holders? what are those??? ;D
stu
-
cup holders?  what are those??? ;D
stu
Hey Stu, it's those little round things you put your beer in ;D
-
Do you have anymore pictures of your antenna mount?
Just this one and it's not very good but does show how it's mounted.
(http://img43.photobucket.com/albums/v133/RockSolid4X4/Tracker/antenna2.jpg)
-
Is it just a piece of plate bent over and screwed into the fender? Thats a pretty slick setup.
-
Is it just a piece of plate bent over and screwed into the fender? Thats a pretty slick setup.
Yep, found a piece of steel laying in the shop. Put it in the vise and bent it to shape. Total cost $0.00 ;D
-
i'll have to try it out. Thanks!
-
You're Welcome!
-
(http://images.cardomain.com/member_images/4/web/496000-496999/496556_30_full.jpg )
-
My favorite spot is the "hole" just below the radio.
-
Mine is on top of the roll bar, out of the way.
(http://www.kielbassa.com/pictures/Kick%20004.jpg)