ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: jga154 on May 03, 2011, 08:10:54 AM

Title: Deceleration Mixture Control Valve
Post by: jga154 on May 03, 2011, 08:10:54 AM

86 Samurai, 1.3L stock, Cali legal

I just discovered this control valve has a hole worn through the aluminum cap caused by the steel clip that holds the assembly. None of the local parts stores can locate it from their suppliers. I tried online to no avail. Photo included.

Any ideas on where to find something like this?

I have it patched right now an it works but would like to replace it. Thanks.

Title: Re: Deceleration Mixture Control Valve
Post by: rascott on May 03, 2011, 01:10:26 PM

that work the egr valve? looks different than mine.
mabe try hawk- they should be able to get you one.

Title: Re: Deceleration Mixture Control Valve
Post by: jga154 on May 03, 2011, 01:53:42 PM

Not part of the EGR. It is called the Deceleration Mixture Control Valve System in the service manual. Supposed to save fuel when you decelerate. I know it won't idle with a hole in the top. Found it for $93.42 at a dealer, ordered it from Hawk used for $25.00.

Thanks.

Title: Re: Deceleration Mixture Control Valve
Post by: lv2fsh on May 03, 2011, 09:40:27 PM

Had to change mine a wile back. was keeping it from passing smog. Had that same hole.