ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: DaddyDave on May 27, 2004, 06:55:45 AM
-
ok, someone has to have the factory Suzuki part numbers for this setup. Can anyone help with this. Thanks a million!
-
Daddy Dave:
I don't know the # but RRO sells the full kit. It was an easy install (just watch out for those factory phillips head screws >:().
-
thanks for the help...i found all of the part numbers needed!! ;D i'm off to call my Suzuki dealership and see what they can do for me!
-
does anyone have pictures of the clamps that are in all of the product pictures installed?
-
I can take some pictures for you this weekend of the kit. I think there is an article on the install at Izook that might have some shots of the clamps. ;)
-
http://www.roadlessgear.com/page/RGL/PROD/OEM201
http://www.roadlessgear.com/html/techarticles/windshield/index.html
;D ;D
-
yeah, i saw all of those. I am just looking for a few clean shots of the hinge, pad mount and the clips. Thanks for the help! ;D
-
Here is the clip:
(http:// http://images.cardomain.com/member_images/10/web/550000-550999/550431_4_thumb.jpg )
-
That first one sure was small :-[ I'll try again:
(http:// http://images.cardomain.com/member_images/10/web/550000-550999/550431_4.jpg )
-
I lightened the pic, it was kind of
cloudy this morning when shoyrtt
snapped this shot
(http://wildcatent.freeyellow.com/latch.gif)
Wild
-
BTW: Wild is the hand model ;D
-
Here is the hinge:
(http:// http://images.cardomain.com/member_images/10/web/550000-550999/550431_5.jpg )
-
BTW: Wild is the hand model ;D
that hand needs to get some sun ;D
-
You are just looking at the wrong side,
that's the side that's gripping the
steering wheel, it's not supposed to
get tanned :P
Wild
-
ok, after some careful review, it appears as though I still need those clips. Anyone have the suzuki part number for them.. I have all of the other parts including hardware.