ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Speedracer7c on May 30, 2004, 11:29:01 AM
-
I know that I need a 5 on 5.5 bolt pattern for my wheels. I want to get 15x7 with a 3.75 backspace but all it says when i try to order them from 4wheelparts.com is 5 or 6 lug. It doesn't specify spacing. I don't want to order the wrong thing. Any help is appreciated.
-
I looked too, I think you are going to have to call.
All I can think of is that rim has both sets of holes,
and I don't think I would like that, I've seen alloys
that were made like that, but never steel wheels
Wild
-
I'm just going to get the 15x8 on 2.75 backspace and get the 3" flexy flares. I think the tires will stick out about 2 inches or so.
-
I'm just going to get the 15x8 on 2.75 backspace and get the 3" flexy flares. I think the tires will stick out about 2 inches or so.
3 1/2 inches with 10.50 tires ;D
-
speedracer,
i just bought some black rock crawlers from a local wheel shop, and i was able to get 15x7 with 3.75 backspacing. the web site is alliedwheel.com it is wheel #51. by the way the wheel was $39.25each, hope this helps.
-
dang 3.5 inches is a lot of stickin out!!! Gonna have to figure something out hehehe
-
If you can ever get these people to send out the right ones, the sticking out problems can be solved.
http://www.jcwhitney.com/webapp/wcs/stores/servlet/EndecaControllerView?D=19ud8481t&Dx=mode+matchallpartial&firstSearch=1&catalogId=10101&Nty=1&Ntx=mode+matchallany&Dn=0+111&Ntt=19ud8481t&tmplframe=EndecaCategoryView&langId=-1§ion=body&storeId=10101&Ntk=AllTextSearchGroup&ss=10101