ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: Armour on May 09, 2011, 09:35:37 PM

Title: Front diff feeler.
Post by: Armour on May 09, 2011, 09:35:37 PM
I am beginning my SAS on the kick. Just wanted to see if there was anyone interested in my front diff. It is the cast XL-7 diff and carrier, 5.13's loaded and ready to bolt in. The case and third were bought brand new just over a year ago through Hawk. This unit is still in the rig. Just wanted to see if there were any interests out there before I pull in out.
Title: Re: Front diff feeler.
Post by: Jluck on May 09, 2011, 09:40:22 PM
theres always interest if its cast steel your referring to. prices? ???
Title: Re: Front diff feeler.
Post by: beagle..t on May 10, 2011, 10:00:10 PM
ya $$$ is always in order for somethjing like that
Title: Re: Front diff feeler.
Post by: Armour on May 22, 2011, 09:59:01 PM
Yes cast steel! Complete unit $600!
Title: Re: Front diff feeler.
Post by: Skyhiranger on May 24, 2011, 09:29:46 PM
Yes cast steel! Complete unit $600!

I'm doubting there is going to be much interest, at that price.  But I could be wrong.
Title: Re: Front diff feeler.
Post by: Jluck on May 25, 2011, 06:49:10 AM
FWIW:
I have passed up bare steel banjos for 200
I sell any third for 75
Good used oem cv's 25 (ish)

So yea I agree with skyhi. Might have to have a "half off" sale to get it in the ball park
Title: Re: Front diff feeler.
Post by: wildgoody on May 25, 2011, 07:18:48 AM
The banjo isn't really the problem, it's the 3rd that nukes, unless
the bolts on the pass side are allowed to get loose, then the 3 hole
mount can break out a bolt or two.

Title: Re: Front diff feeler.
Post by: Skyhiranger on May 25, 2011, 11:37:51 AM
The banjo isn't really the problem, it's the 3rd that nukes, unless
the bolts on the pass side are allowed to get loose, then the 3 hole
mount can break out a bolt or two.



...or unless you run the banjo into a rock, or drop it down on a rock.