ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Build Diaries, How-To, DIY => Topic started by: 67fastback on May 11, 2011, 11:09:24 PM

Title: Samurai Master Cylinder Swap for rear disc brakes - Subaru, Mazda
Post by: 67fastback on May 11, 2011, 11:09:24 PM

Title: Re: Samurai Master Cylinder Swap for rear disc brakes - Subaru, Mazda
Post by: ebewley on May 12, 2011, 01:11:49 PM

This is a very nice post... Thanks for including the pictures and descriptions..

-Eric

Title: Re: Samurai Master Cylinder Swap for rear disc brakes - Subaru, Mazda
Post by: Foot on May 14, 2011, 04:14:18 PM

Really kool when someone takes the pain and the time to share, like he said,especially with pics.

Title: Re: Samurai Master Cylinder Swap for rear disc brakes - Subaru, Mazda
Post by: MuttKick on August 19, 2011, 07:21:36 AM

How TF does one pull the plunger out of the booster?

I have a Sidekick 4 door with ABS booster and the plunger does not "simply pull out". Are they different from the older styles?

Is there a trick?

I have a backup plan. I tested a 1/4 drive long sleeve 5/16 socket. The 5/16 part goes inside the booster and engages plunger and the "rounded off" drive side goes into the Subaru  M/C. It works! So I may just leave it like that but I`m still curious about the damn plunger removal.