ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 144man on May 15, 2011, 12:20:59 PM
-
My sensor idiot light came on at 60K, like the manual said it would. I found the reset switch under the dash, and flipped it to the down position. The light comes on when starting, but goes out. Do I leave the switch in the down position, or return it to up. The manual is unclear if I should reset the switch.
Forgot to mention, bone stock '87 Samurai. And it passed PA emissions with the light on, so everything seems to be working.
-
You are right the manual I also have is vague.......
I just left it in the opposite position as the light came back/ and stayed on when I flipped it back.
I think it comes on momentarily when you turn the key on as a system indicator check.
Hope someone that has more info responds and can give both of us a better clue!!
(P.S. I have just about all the ECU systems disconnected anyway as I have gone to a Weber Carb System)
CAPT
-
The sensor light lights up when the key is turned to run/start, to check the bulb, then it goes out once the engine is started, if there is no problem. It is working as designed.