ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: moedway on May 18, 2011, 08:11:17 AM

Title: 94 samurai Transmission
Post by: moedway on May 18, 2011, 08:11:17 AM

Hello How many nuts and bolts connect the transmission to the engine on ive remove for total and i still can get it to break away

Title: Re: 94 samurai Transmission
Post by: fordguy79 on May 18, 2011, 08:25:39 AM

4 on the bell housing  2 from the  starter and 2 that hold on the inspection plate that's on the motor side
4 bolts hold the Tran's mount to the Tran's then 2 bolts to the cross member and remove the intermediate shaft you should be good 

Title: Re: 94 samurai Transmission
Post by: moedway on May 18, 2011, 11:06:21 AM

still dont now what im missin starter bolts check bell housing 2 at top to on motor side check i dont see anyyhing else

Title: Re: 94 samurai Transmission
Post by: moedway on May 18, 2011, 02:18:47 PM

thanks found the inspection plate stiil will not come down