ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: asuna basher on May 26, 2011, 05:53:37 PM
-
i have some old 3 inch blocks from another project i never finished and thought about putting them in my 92 sunrunner{sidekick} but have run into a little snag how do you access the top of the body bolts to put in longer ones? on all of my domestic vehicles there was a trap door as such to pull the old bolts out and put in new longer ones any ideas by the way it is a hunting buggy so i am makeing bumpers and such so don't care about bumper gaps
-
The body bolts are welded to the body, so there is no access needed or available
Wild
-
i see so i guess that means if i want to use them i well have to locate some of those sleeve type nuts i have seen in some of the kits does anyone know where to find those? or am i just kicking a dead horse kinda seems a shame to buy a kit when i have new blocks just sitting here
-
As far as I know it's a make your own thing, or the blocks
need to be tall enough to get a nut onto the body stud and
then you use a new bolt/nut to bolt the lift to the frame.
This only works with a lift that is made from square tubing, as you
need to reach into the opening to hold the bolt as you tighten the nut
Wild
-
If you are looking for a complete body lift or just the stud connectors take a look at SR CUSTOMS: http://www.srcustoms.ca/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=23&category_id=7&option=com_virtuemart&Itemid=56 (http://www.srcustoms.ca/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=23&category_id=7&option=com_virtuemart&Itemid=56)