ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: tracker8wr on May 26, 2004, 02:53:04 PM

Title: My tracker
Post by: tracker8wr on May 26, 2004, 02:53:04 PM

i thought ya'll might want to know what my tracker looks like. (http://www.geocities.com/race8thwonder01/tracker2.JPG) (http://www.geocities.com/race8thwonder01/trackerswimm.JPG)(http://www.geocities.com/race8thwonder01/tracker3.JPG)

Title: Re: My tracker
Post by: 92Sidekick4x4 on May 26, 2004, 02:53:36 PM

hhmmmmm the pics arnt showin up for me

Title: Re: My tracker
Post by: tracker8wr on May 26, 2004, 02:55:32 PM

meeither geocities sucks

Title: Re: My tracker
Post by: explosivo on May 26, 2004, 02:56:39 PM

Uploaded them for ya :)

(http://www.kielbassa.com/pictures/tracker2.jpg)
(http://www.kielbassa.com/pictures/tracker3.jpg)
(http://www.kielbassa.com/pictures/trackerswimm.jpg)

Title: Re: My tracker
Post by: explosivo on May 26, 2004, 02:57:22 PM

Also, what are you using on the end of your snorkel?

Title: Re: My tracker
Post by: Maiden Hell on May 26, 2004, 02:57:35 PM

Tracker in it's natural habitat!  :)

Title: Re: My tracker
Post by: 92Sidekick4x4 on May 26, 2004, 02:58:37 PM

what kinda lift do u got?

Title: Re: My tracker
Post by: tracker8wr on May 26, 2004, 02:59:30 PM

cool that is the louisiana/texas border on the beach at the gulf of mexico.  Thanks for posting

Title: Re: My tracker
Post by: tracker8wr on May 26, 2004, 03:01:06 PM

snorkel feeds into stock airbox, with K&n air filter.  Custom made (well homemade)

Title: Re: My tracker
Post by: explosivo on May 26, 2004, 03:02:31 PM

Quote

Custom made (well homemade)

Haha, is there a difference? ;D

But what's on top of it... the curved part?

Title: Re: My tracker
Post by: tracker8wr on May 26, 2004, 03:14:13 PM

the top is a top secret piece if i tell u i'll have to kill u. no it is electrical coduet cap. u know when the electrical cable comes into your huse it feeds thruogh this cap they make them metal and plastic i used plastic for obvious reasons. i did have to modify the cap a bit with a saw and some pvc glue if u get one u will see what i mean.

Title: Re: My tracker
Post by: tracker8wr on May 26, 2004, 03:14:58 PM

electrical conduet cap

Title: Re: My tracker
Post by: Digger on May 26, 2004, 04:35:36 PM

This is the second home-made snorkel I've seen recently that runs through the driver's side dummy panel behind the hood without cutting a hole in the fender. Was this easy to run up through there? what was the main tube constructed of? It looks like 2 or 3" PVC conduit...

Title: Re: My tracker
Post by: tracker8wr on May 27, 2004, 03:05:51 AM

it is all 2" PVC that i bored out as much as possible. there was some cutting under the hood, remove dummy pannel, cutting on side brace, and i ground down the pvc so it would fit easier. it doesn't move around at all and i used the antina to mount the upper bracket to.

Title: Re: My tracker
Post by: safarikick on May 27, 2004, 05:39:49 AM

 Do you have pix of the snorkel? ???

Title: Re: My tracker
Post by: nuts4hotwheels on May 27, 2004, 08:15:38 AM

I would love to see a close up of the snorkel setup.  I have been wanting to add a snorkel to my kick, but I wanted to avoid cutting a hole in the exterior.