ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: mike3780 on June 03, 2011, 12:40:22 AM

Title: CALMINI SOLID AXLE SWAP SYSTEM
Post by: mike3780 on June 03, 2011, 12:40:22 AM

I was just wondering i have the undertaker kit and put in the T case new mount in, now will that inter fear with the calmini 4 link system? from the pic's i have seen it looks as if the  4 link bolts in the same place as the undertaker kit

Title: Re: CALMINI SOLID AXLE SWAP SYSTEM
Post by: wildgoody on June 03, 2011, 12:50:31 AM

You are treading into uncharted waters, there are very few CalMini SAS Track/Kicks
and a similar number of Undertakers out there, none of which to my knowledge
have made it into the same vehicle

You might have to contact CalMini to get a real good answer to this one

Wild

Title: Re: CALMINI SOLID AXLE SWAP SYSTEM
Post by: Jluck on June 03, 2011, 08:21:59 AM

and post the answer here if you get a decent one from them.

Title: Re: CALMINI SOLID AXLE SWAP SYSTEM
Post by: DaddyDave on June 08, 2011, 03:42:23 PM

Do you have a pic showing the clearance on your vehicle currently with the undertaker installed?
I ask because the CALMINI kit ships with a new transmission cross-member that is also the front radius arm mount. PM me and I can send over some photos.