ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: airmanwilliams on June 21, 2011, 07:33:21 AM

Title: fitting 32's
Post by: airmanwilliams on June 21, 2011, 07:33:21 AM

will adding 2" shackles to my 3" deaver spring under clear 32's? anyone have this setup or try it once?

Title: Re: fitting 32's
Post by: Drone637 on June 21, 2011, 10:40:10 AM

It will be close, but with some heavy fender trimming/hammering they should fit.  Depending on your backspacing they will rub on the back of the fender well.

Title: Re: fitting 32's
Post by: tuxblacray on June 21, 2011, 02:51:47 PM

Are the shackles 4" hole to hole and provide 2" lift? If so I think the will fit with some trimming to the bottom corner of the fender. What tires are you reunning now? How much clearance do you have between the tires outer tread and the bottom rear fender when you are turning?