ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Fredo on May 25, 2004, 03:47:35 AM

Title: How to?
Post by: Fredo on May 25, 2004, 03:47:35 AM

change rubber boots on a cv?

I try this on a 99 tracker but, any help are welcome.

Fredo

Title: Re: How to?
Post by: Fredo on May 25, 2004, 04:02:33 AM

Cool i found this:

http://www.staugustinefwd.com/Diagnosis/Removal/removal.html

;D

Fredo

Title: Re: How to?
Post by: trackermad on May 25, 2004, 05:09:20 AM

Your instruction page looks pretty good.  I do have some suggestions though.  You only need to take appart the inboard cv to replace both boots but if any boot is broken you should take appart that joint to clean it.  I like break cleaner for the job.  Also I tend not to bother with taking the hub appart I just pull off the hole spindle.  One other thing I always replace both boots even if only one is broken there only ten bucks and its easier to only take everything appart once.  

Oh yea there is a special tool that you will need for the clamps but a pair of wire cutters may work in a pinch.