ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Build Diaries, How-To, DIY => Topic started by: Drone637 on June 29, 2011, 09:35:36 PM
-
While my brother was over on the mainland helping us weld on Project Trouble he showed off his rear speaker install on a 4 door Sidekick.
(https://lh3.googleusercontent.com/-HrnZ4NYqAtg/Tgv4qrOpqyI/AAAAAAAADxA/n0dfYQcy5F8/s512/IMGP0997.JPG)
Specs are a 10" Marine Sub and Amp.
Only tools needed are table saw, jig saw, tin snips, and screw driver, plus glue. If anyone is interested he can write up some instructions.
-
That's sweet! Kinda what I had in mind.
-
I'll get some better pictures today and try to post. nice part is its protected for the most part and out of the way.
-
While my brother was over on the mainland helping us weld on Project Trouble he showed off his rear speaker install on a 4 door Sidekick.
(https://lh3.googleusercontent.com/-HrnZ4NYqAtg/Tgv4qrOpqyI/AAAAAAAADxA/n0dfYQcy5F8/s512/IMGP0997.JPG)
Specs are a 10" Marine Sub and Amp.
Only tools needed are table saw, jig saw, tin snips, and screw driver, plus glue. If anyone is interested he can write up some instructions.
I would appreciate some instructions
thanks
-
Probably the best looking one I've seen yet. Give your brother +1 TP for us. I was going to do that until I got lazy and bought a 10"-in-box Sony.
-
Ah, the brother would be Derek. He decided to forgo a fancy handle when he joined the board. :D
-
I will throw in a TP for not having a 3 mile long, stupid ass forum name! :)
-
I think it was on the other forum that i saw a write up on installing a sub in the side panel.