ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: MENNACE on July 06, 2011, 06:39:51 PM

Title: Just bought a Samurai ----PLEASE HELP!
Post by: MENNACE on July 06, 2011, 06:39:51 PM

Just picked up an 88 Samuri, (lifted and snorkled) but she needs some work, can anyone give me a good link for a manual. I need exploded diagrams for the drivetrain (rear diff) and wiring diagrams. Any help is greatly appreciated.

Title: Re: Just bought a Samurai ----PLEASE HELP!
Post by: djlantis57 on July 07, 2011, 12:50:42 AM

Hey your best bet may be to check out Ack's site. I know you can dig up lots of manuals and diagrams there. Helped me out once before.
www.acksfaq.com (http://www.acksfaq.com)
HTH

Title: Re: Just bought a Samurai ----PLEASE HELP!
Post by: mrdezyne on July 08, 2011, 12:28:24 PM

I found a complete shop manual on Amazon, new it listed for like $285 but there were a couple used ones available for $19...

Title: Re: Just bought a Samurai ----PLEASE HELP!
Post by: tuxblacray on July 09, 2011, 08:09:54 AM

But this link ..... www.acksfaq.com (http://www.acksfaq.com)
 
 and the info are free.......

Title: Re: Just bought a Samurai ----PLEASE HELP!
Post by: BRD HNTR on July 09, 2011, 06:16:33 PM

Nothing like having a FSM at hand.  You might not have a computer in the garage, or a garage to work in.  ACK's is a GREAT source if you don't have your own FSM.
Some shop manuals are not FACTORY SERVICE MANUALS.