ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: mbruce on July 08, 2011, 07:42:41 PM

Title: Wiring for motor install
Post by: mbruce on July 08, 2011, 07:42:41 PM

I'm putting in a '95 1.6/8v and the modified wiring harness in a samurai...

I took pictures of the fuses and etc but didn't pay attention to all the grounds...where is a good place to start to see where the grounds are? Would they be identified in the engine wiring diagrams in a chilton or Haynes ? I am a little worried about hooking everything back up the way it was...A lot worried really...lol

Title: Re: Wiring for motor install
Post by: Skyhiranger on July 08, 2011, 08:41:28 PM

Yes, the chiltons and haynes manuals have the ground wiring in them.
The ground symbols look like this

 ____
  ___
    _


All the wiring grounds have a ring terminal on the end of the wire, from what I recall.