ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: Texagon on July 10, 2011, 03:14:54 PM
-
I'm starting to work on some electrical issues with the 88.5 Samurai and I had a question. I'm not great at electrical stuff but obviously something is wired wrong here. My dashboard turn indicators are on all the time. The previous owner solved this by putting a piece of electrical tape across them to hide them. Ugh.
So when I put the turn indicator on the corresponding light goes OFF-ON OFF-ON OFF-ON instead of the ON-OFF it's supposed to do. Has anyone seen this before? I'm sure it's probably an easy fix but I'm not exactly sure where to start on this one.
(http://blazerfarm.com/zuk/turnindicators.jpg)
-
Check the grounds for the turn signal, they cause all sorts of trouble like this
Wild
-
I had a very small piece of wire get into the plug when I plugged the cluster back in and it did some weird stuff like this, I guess it shorted across a couple of the flat wire on the board. I bought one with a tach in it so who knows where it had been!
-
Sounds like someone has wired the ground for that particular circuit to a +12V line.
-
That is the cleanest off road dash I have ever seen. ;D Hope you figure it out.
-
That is the cleanest off road dash I have ever seen. ;D Hope you figure it out.
You should see under the dash. Looks like someone got an electrical science kit as a kid.