ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: mrdezyne on July 12, 2011, 03:40:30 PM

Title: WTB: 1.6L 8V or 16v for swap, Tulsa OK
Post by: mrdezyne on July 12, 2011, 03:40:30 PM

So anyone within 2-300 miles of Tulsa have a good running 1.6 8V to part with?  I've been scouring Craigslist and thinking of possible salvages close by but no luck.  

Ooooor someone that is willing to ship one?  I'll broaden the search to a 16v also...

Thanks,
C

Title: Re: WTB: 1.6L 8V or 16v for swap, Tulsa OK
Post by: zuksofhazzard on July 18, 2011, 12:58:58 PM

I'm gonna Part my 4 door out...

Runs Great!

geo tracker on hell's revenge, escalator, moab utah (http://www.youtube.com/watch?v=wHjowYn2_cE#)

Basically, I'm gonna build a 2 door, so the Complete Front/Rear drivetrain, Calmini Lift, and the T-case are gonna swap.

The Rest of the Rig is Available... '96 Geo Tracker, 16 Valve, 4 speed auto, A/C, Power Steering, Power Windows, Mirrors, and Locks, Glass and Full Interior. (the frame and body have rust...)

Located in Sioux City, IA, 51106.

PM if interested...

(I go to Kansas City once in a while...)

Title: Re: WTB: 1.6L 8V or 16v for swap, Tulsa OK
Post by: TrickTrax on August 19, 2011, 12:55:35 PM

I live south of Wichita KS. I am getting ready to put a rebuild/massaged motor in my 90 Tin Top Tracker and will have a 1.6L 8V for sale with in the next month. It is currently my daily driver and has 104,000 miles on it but will probably have around 106,000 when I pull it. It doesn't burn oil , has been reliable, I just wanted a little more umph out of my power plant. Let me know if you are interested.

Title: Re: WTB: 1.6L 8V or 16v for swap, Tulsa OK
Post by: Gustavo on August 22, 2011, 03:32:20 PM

are you looking to sale an engine ? will it fit a 1986 Samy?

Title: Re: WTB: 1.6L 8V or 16v for swap, Tulsa OK
Post by: mrdezyne on August 24, 2011, 06:47:30 AM

Thanks everyone, I found an 8v on the super cheap to rebuild here local.  Just dropped off the block, head and crank yesterday at the machine shop.

Gustavo, you should PM TrickTrax about that motor, it sounds like a great drop in if you are looking to do a 1.6 swap.  Yes it will fit, yes you will need to do some modifications to wire harness and engine mounts.  Search the 1.6 swap and there is loads of information or PM me and I can direct you to a few links that I have studied up on.  Here are the basics...

http://www.zukioffroad.com/Tech_Library/engine_swaps.htm (http://www.zukioffroad.com/Tech_Library/engine_swaps.htm)