ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: segermech on July 22, 2011, 06:06:23 AM
-
My stabilizer imakes a lot creeks and groans. I checked the FSM and the bolts on eack end (pivots) are soppossed to be tight 25ft-lbs or so not loose to allow the bush to slip.
My question is where is the slip really supposed to happen? Will buying a new stabilizer fix this creek and groan problem.
94 sammy
Thanks
-
Doubtfull that your stabilizer is actually making those noises. Start it up and have someone turn the wheel while you watch the stabilizer / front end to identify the source.
Otherwise pull the stabilizer and try to extend it. If it is in a bind or loose then yes replace it.
I am betting you will find the noise isn't from the stabilizer though...