ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Model Specific Suzuki Forum => Suzuki Grand Vitara, Vitara, Chevy Tracker (Gen. 2 Platform) 1999-2005 => Topic started by: mcs on August 15, 2011, 03:37:45 PM

Title: Front thirds
Post by: mcs on August 15, 2011, 03:37:45 PM

Does anyone know if a front third member from a 95 auto sidekick will fit into a 01 tracker. because I tried to switcf from a 4.62 to a 5.12 and the axle shafts are way different. Any help is appreciated

Title: Re: Front thirds
Post by: Frank84 on August 15, 2011, 03:53:16 PM

I know '96-'98 (26 spline) fit but I'm not sure about '95.  You need the inner axle shaft from the donor vehicle along with the right cv shaft.  You'll have to make a hybrid shaft that has the middle and outer part from your vehicle and the inner part that goes into the diff from the donor.

Title: Re: Front thirds
Post by: Skyhiranger on August 19, 2011, 06:35:15 AM

89-95 fronts have 22 spline axle shafts.  In 96 they went to 26 spline front axleshafts.

Title: Re: Front thirds
Post by: Uncivilized on August 29, 2011, 05:49:15 PM

Does this mean it could be done if you used the 99+ side gears?