ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: jow003 on August 17, 2011, 01:50:53 PM

Title: Master cylinder replacement
Post by: jow003 on August 17, 2011, 01:50:53 PM

Been a while since I posted a legit comment on here just lookin for some tech help.  I'm getting close to my project bein done and I need a new master cyl.  Upgrading to yota axles and the fact my old one was a bit leakey.  I have heard a couple ppl puttin stock ones from a lot of different cars.  What kind would work the best/would be the biggest I can use without modification on my 87 samurai?

Thanks in advance,
-O

Title: Re: Master cylinder replacement
Post by: mrfuelish on August 18, 2011, 09:46:20 AM

I'm guessing you are going disk in the front and drum in the back, I would try a four door sidekick master, the 87 should have the brakes in a x config. so your left front right rear are on the same cup(line) on the master, I would swap the lines under the passingers feet area and look for a proportioning valve from a 1990-1995 samurai for the rear to have one brake line, that should give you a big start.