ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: zuki1018 on September 07, 2011, 11:23:41 AM

Title: Which motor mounts for 16v swap?
Post by: zuki1018 on September 07, 2011, 11:23:41 AM

Im pretty sure you use the rubber sami mounts for the 1.6 swap correct?  

The tracker mounts are much stronger looking but they are thicker too... maybe too big. Even with fairly new mounts, sami units seem awfully dinky and let the motor move too much IMO.

Title: Re: Which motor mounts for 16v swap?
Post by: zuksofhazzard on September 10, 2011, 08:10:40 PM

I used Samurai Mounts when I put a 16 valve in mine. I think there was a shim on the Passenger side? I can't remember.

I think you can use Dodge 318 motor mounts too. You may want to research that a little first. ;)