ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: Safari-Tracker on September 07, 2011, 08:20:39 PM

Title: Who makes a good cam
Post by: Safari-Tracker on September 07, 2011, 08:20:39 PM

I plan on a complet rebuild in my 1.6 8V motor and would like to chang out the cam for somthing a little bigger. Who has used the after market cams that are available from the venders on here?

Title: Re: Who makes a good cam
Post by: Safari-Tracker on September 10, 2011, 01:02:13 PM

I guess no one makes a good cam.

Title: Re: Who makes a good cam
Post by: wildgoody on September 10, 2011, 01:08:53 PM

Check the vendors, Calmini and Hawks, for parts like that.

I have a good cam, but it was custom ground by Engle cams in Santa Monica
and cost me $200 12 years ago

Wild

Title: Re: Who makes a good cam
Post by: Safari-Tracker on September 10, 2011, 09:11:51 PM

Who has the best off the shelf grind. With out having to get one done custom

Title: Re: Who makes a good cam
Post by: wildgoody on September 10, 2011, 10:31:12 PM

Well that is the question that I cannot answer, they don't
post the specs and they each seem to have their own
different grinds, so you will need to decide what the Trucklet
is going to be doing, street, strip, offroad, then call and ask
what these cams are going to do for the engine.

Wild