ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: ARMRASTLER on September 22, 2011, 02:46:55 PM

Title: Toyota axles or D44 axles from a 78 wagoneer?
Post by: ARMRASTLER on September 22, 2011, 02:46:55 PM
I have a chance to get either stock yota axles for 250.00 or Dana 44 from 1978 wagoneer axles with correct drop front /rear. Not sure which way to go? Both are gonna be stronger than stock Sammy axles but not sure which is stronger between the two upgrades? Any suggestions
Title: Re: Toyota axles or D44 axles from a 78 wagoneer?
Post by: ARMRASTLER on September 22, 2011, 08:29:53 PM
Really... No replies??
Title: Re: Toyota axles or D44 axles from a 78 wagoneer?
Post by: wildgoody on September 22, 2011, 09:22:27 PM
I say go Yota, it's sort of in the family, so to speak, they Aisin (sp)
make Suzuki Axles also, as well as the transmissions, they are a
division of Toyota
Title: Re: Toyota axles or D44 axles from a 78 wagoneer?
Post by: bentparts on September 24, 2011, 07:28:35 AM
I don't know , Just saw an add in a 4x4 mag about a company that is making BOLT ON portal boxes for D44's that give you 4 inches of lift right there! Now that sounds very interesting.
Title: Re: Toyota axles or D44 axles from a 78 wagoneer?
Post by: KJMac on September 27, 2011, 09:53:03 AM
The Toyota will save quite a bit of weight! 250 for the yota's is cheap, I would go that route!
Where are you buying them? Around here in the Salem Or are the front is 250-350.