ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: ffhammerhand on September 25, 2011, 11:31:41 PM

Title: Roll cage for my 86
Post by: ffhammerhand on September 25, 2011, 11:31:41 PM

i want to cage my sammi front and rear, is it worth buying the cage from petroworks and installing it myself? is it easy? or should i call in some favors and try to fab one myself?  any input is greatly appreciated!!

Title: Re: Roll cage for my 86
Post by: Drone637 on September 26, 2011, 09:30:17 AM

If you have access to a welder I would recommend the cage from Davesport.  You can get a front weld on kit or a complete roll cage, which is what I run.

Title: Re: Roll cage for my 86
Post by: kreator on September 27, 2011, 12:51:56 PM

Where are you located ?

Title: Re: Roll cage for my 86
Post by: frozenplum4 on September 27, 2011, 05:15:19 PM

Quote from: Drone637 on September 26, 2011, 09:30:17 AM

If you have access to a welder I would recommend the cage from Davesport.  You can get a front weld on kit or a complete roll cage, which is what I run.

I don't know what kind you have but if you have the full cage for the soft top you can still put up the top and take it down right?

Title: Re: Roll cage for my 86
Post by: Drone637 on September 27, 2011, 09:00:07 PM

Quote from: frozenplum4 on September 27, 2011, 05:15:19 PM

I don't know what kind you have but if you have the full cage for the soft top you can still put up the top and take it down right?

Yes, it works fine with the stock soft top.  Here is a picture with the full cage added onto the existing roll bar:

(https://lh4.googleusercontent.com/-VxBMThwrpfA/RoFo1j74rRI/AAAAAAAAAZM/iCxJS2bDL3c/s640/CIMG3940.JPG)

And my full cage, without the back add-on but not using the stock roll bar, as the SJ-410 doesn't come with one:

(https://lh5.googleusercontent.com/-QbkXStxU4mw/RlxQFbeH1SI/AAAAAAAAALU/yEOIg8y_7eg/s640/Zuki%252520145.jpg)