ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: susie on September 26, 2011, 06:08:17 PM

Title: ECM leave it or pull it
Post by: susie on September 26, 2011, 06:08:17 PM

I have made the 1.6 fuel injected swap into the samurai. Do i leave the old computer in or remove it? It's an 86 that was carbed. 

Title: Re: ECM leave it or pull it
Post by: 915SAMURAI on September 26, 2011, 06:10:19 PM

Of coarse you have to leave it, thats whats powering everything on your vehicle. when you add the swap you are running the 1.6 liter engine management and harness

Title: Re: ECM leave it or pull it
Post by: Skyhiranger on September 26, 2011, 06:57:50 PM

Quote from: susie on September 26, 2011, 06:08:17 PM

I have made the 1.6 fuel injected swap into the samurai. Do i leave the old computer in or remove it? It's an 86 that was carbed. 

Once you do the 1.6 swap, the samurai ECM and all its wiring can come out.