ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: Spitfire Rick on September 27, 2011, 02:49:36 AM
-
Ive got a 99 tracker project Im working on Ive got a 4.3 /7004r the gauges didnt work so i redid the gauge pod with spedo tach & a fuel gauge.the fuel sending unit is the stock tracker unit & reads 120 ohms =full 32.5ohms=1/2 3 ohms=full
the gauge I have needs 240ohms =E ,103ohms 1/2,33ohms=F when the sending float is all the way down or empty the gauge reads over 1/2 tank I cant find a gauge that matched the sending unit specs & if Ive got to modify something I want to modify what Ive already got
any one know of a way to add something like a resistor or ? or a aftermarket 2' guage that will work with my sender ?
-
i have a yard stick >:D
have you discussed this with the gauge MFG? they might make a sending unit that can be modified. it's hard to beleive they didnt make a way(possibly inside the guage) to adjust those values. It seems like it would be simple to just have a resistance adjustment that would allow the top and bottom of the gauge to be adjustable, then the gauge would make internal adjustments for the range.
-
the gauge I used was something I had but is comparable to a lot of gauges I found this in the internet last night
http://sites.google.com/site/shannonpowerlab2/home/calibrating-your-fuel-gauge (http://sites.google.com/site/shannonpowerlab2/home/calibrating-your-fuel-gauge)
Im going to look into this fix