ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: blackpearl on May 15, 2004, 05:26:23 PM

Title: wiring help
Post by: blackpearl on May 15, 2004, 05:26:23 PM

need help wiring a 1.6 into a sammy, every thing else installed just wiring left to do need the important wires and what wires can disapper.

Title: Re: wiring help
Post by: wildgoody on May 16, 2004, 04:40:59 AM

Is your 1.6 a 16valve or 8 ???
Is it going to be Injected or Carb ???

If you are going the Injected route you
will need the ECM, then take all the sensor
wires and lead from the Distributor, don't
forget the Electric fuel pump to make the EFI
work, it also has a conrol circuit to cut the pump
off when the engine fails to start, or stalls.

Good Luck

Wild