ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: RifleRide on May 13, 2004, 03:22:34 AM

Title: 2.o belt replacement
Post by: RifleRide on May 13, 2004, 03:22:34 AM

"Give me suggestions on how to replace belt on 99 tracker.  Tensioner pulley does not seem to be working properly when wrench is applied"

Title: Re: 2.o belt replacement
Post by: jagular7 on May 13, 2004, 04:06:29 AM

Only thing I can suggest is that you rotate the pulley bolt and not the bracket bolt. I made this mistake once. Got the belt off, but then had a real problem getting the belt back on same way I took it off. DOH!!!

Use a breaker bar with proper size socket and rotate it opposite of the belt. This should work.