ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Fredo on May 05, 2004, 02:10:03 PM
-
When you change your stock tracker rear diff for a ford 9 inchs, how do you deal with the speed sensor gear?
(http://www.izook.com/tech/samurai/drivetrain/swarbseries/trackickarb/images/P5020014.jpg)
How your speedo can read correct speed?????
Fredo
-
SpeedO gear is in the T-case. Thats the ABS senser. I took mine out when I installed the ARB ;D
-
ok and if your rear end have shity ABS, remove this gear cancel ABS?
Fredo
-
On this page they call this gear (speed sensor gear), look:http://www.izook.com/tech/samurai/drivetrain/swarbseries/trackickarb/trackickarb_2.htm
Fredo
-
It's called speed sensor gear because that's what it does. It senses the speed of the rear axle and compares it to the front wheels so the computer can adjust brake actuating in pulses.
-
can it be removed without everything going haywire?
stu
-
can it be removed without everything going haywire?
stu
Welllll. Mines out and I can still stop ;D
And with the bigger tires the rear brakes don't lock up on dry pavement (on mine).
-
I pulled mine, too. Haven't noticed any difference.