ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: biker on December 31, 2011, 08:21:19 AM

Title: Interchange ?
Post by: biker on December 31, 2011, 08:21:19 AM

Does anyone know if the exhaust side of the head is the same pattern on a G13, M13A, M15A compared to an 8v or 16v head? The reason I ask is I found some turbo manifolds online for the "G and M" series motors and am wondering if they would match to the 8v or 16v head?
Thanks

Title: Re: Interchange ?
Post by: Rhinoman on January 01, 2012, 01:39:29 PM

A G13A or G13BA exhaust manifold will bolt up to a G16B 8V engine. A G13BB exhaust manifold will fit a G16A or G16B 16V head. I don't think that the M manifold will fit any G series - the Jimny or Swift guys would know that.
You would have to check clearances, the turbo manifolds are usually designed for a front wheel drive application.

Title: Re: Interchange ?
Post by: biker on January 01, 2012, 04:16:04 PM

Thanks for the info Rhinoman :) I thought this one looked like it might fit my 16v and it points the turbo out away from the block. http://www.ebay.ca/itm/Turbo-Exhaust-Manifold-SUZUKI-Solio-Swift-G13-T25-Flang-/290646134364?pt=AU_Car_Parts_Accessories&hash=item43abdc0e5c (http://www.ebay.ca/itm/Turbo-Exhaust-Manifold-SUZUKI-Solio-Swift-G13-T25-Flang-/290646134364?pt=AU_Car_Parts_Accessories&hash=item43abdc0e5c)

Title: Re: Interchange ?
Post by: bentparts on January 11, 2012, 04:01:08 AM

That would be great if it fits the manifold, but you may have fender well clearance issues with the turbo mounted that way.

Title: Re: Interchange ?
Post by: biker on January 15, 2012, 05:45:35 PM

How much space does the turbo take up, I'll check clearances when the manifold gets here, I hope this week.