ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: mrdezyne on January 02, 2012, 10:03:48 AM

Title: 88 samurai parts in Tulsa, may ship
Post by: mrdezyne on January 02, 2012, 10:03:48 AM

UPDATED TO MAKE OFFER 1-13-12

So i have a pile of parts and a 1.3 block left over after my 1.6 swap.  Anyone need this stuff?

88 1.3 intake and carb = Sold
88 all metal radiator, needs cleaned = MAKE OFFER
2 fans and clutches = MAKE OFFER
pressure plate and disc, good spring, plenty of disc left = MAKE OFFER
wp pulley = $5
1.6 AND 1.3 exhaust manifolds (not pictured) = MAKE OFFER
throttle cable =Sold

1.3 block as pictured, ran but needs rebuild, = MAKE OFFER


If you see anything of interest shoot me a PM with an offer, I'm just trying to make a couple bucks if possible to help fund this money pit... :)

Title: Re: 88 samurai parts in Tulsa, may ship
Post by: mrdezyne on January 02, 2012, 01:53:20 PM

Still have this set of wheels also, $200 OBO...

Title: Re: 88 samurai parts in Tulsa, may ship
Post by: akapeewee on January 03, 2012, 04:46:16 AM

u still have brake booster and  proportioning valve?

Title: Re: 88 samurai parts in Tulsa, may ship
Post by: mrdezyne on January 03, 2012, 06:41:24 AM

No booster or valve, sorry.

oh and to clear things up and answer all the funny guy PM's, no I don't have 88 parts, I only have the 10 listed above but they are from a 1988 model zuk...  :laugh:

Title: Re: 88 samurai parts in Tulsa, may ship
Post by: cadams3 on January 03, 2012, 10:30:57 AM

Hey am planning on doing a 1.6 swap myself someday...  Just wondering how yours went and if you're happy with it?  Can you notice a big difference?  What kit did you use?  Did you use a 1.6 8v or the 16v?  Thanks and much appriciated!

Title: Re: 88 samurai parts in Tulsa, may ship
Post by: mrdezyne on January 03, 2012, 12:53:18 PM

Its not in the truck yet so I can't really comment on the difference but if you consider its almost a 30% power increase it is bound to be a noticable improvement.  I also ported the intake and have a calmini style header so that should help a bit.
 
I am using the Trail Tough kit.  Will finish up the trans rebuild this week so I hope to get it all bolted together with the adapter this weekend and dropped back in the truck.  Its the 8V, a little easier to swap I think than the 16V.

It almost looks too purty to put back in the zuk...

Title: Re: 88 samurai parts in Tulsa, may ship
Post by: cadams3 on January 03, 2012, 08:46:45 PM

Wow!  Hey thanks for the reply!  That engine looks like candy! hahahaa  Good luck and keep us posted!

Title: Re: 88 samurai parts in Tulsa, may ship
Post by: mrdezyne on January 09, 2012, 09:20:21 AM

Intake and Carb sold...

Title: Re: 88 samurai parts in Tulsa, may ship
Post by: mrdezyne on January 13, 2012, 09:01:45 AM

Updated, accepting offers on remaining stuff...

Title: Re: 88 samurai parts in Tulsa, may ship
Post by: mrdezyne on February 06, 2012, 07:46:00 AM

What if I part out the 1.3?  Does anyone need parts from it?  I can pull the head, and tear it down to see what kind of shape the crank is in, any interest in pieces of it?  I hate to just dump it at the scrap yard....

Title: Re: 88 samurai parts in Tulsa, may ship
Post by: hwally on April 15, 2012, 11:14:22 AM

Hello, I know you sold lots of this already.  Just wondering if you have the distro and housing.  If not could you give me an idea about what they normally go for.  Thanks

Title: Re: 88 samurai parts in Tulsa, may ship
Post by: kartracer162 on April 15, 2012, 04:05:15 PM

how much for 1.3 if i pick up

Title: Re: 88 samurai parts in Tulsa, may ship
Post by: mrdezyne on April 16, 2012, 07:50:13 AM

From checking on ebay motors, a rebuilt distributor for the 1.3 goes for anywhere between $160-$250 and up.  Used ones are all over the place from $32 to $80.

I do still have the distributor and housing, how does $45 sound shipped?

The block is still available too, if you are coming to pick it up how is $100 for it and any other items you might find in my parts stash that you might need... exhaust mani's, alt, motor mounts....

Title: Re: 88 samurai parts in Tulsa, may ship
Post by: airdreams1 on April 16, 2012, 04:00:39 PM

wish I lived closer, id love the wheels!   any idea what it would take to ship them?

Title: Re: 88 samurai parts in Tulsa, may ship
Post by: mrdezyne on April 17, 2012, 06:40:04 AM

If you have a Grayhound bus terminal close by I can ship them via bus fairly cheap.  Last time I checked on shipping it was close to $75.  We might be able to work something out though, and I can check to see how much it would be to ship from my shipping dock here at work, we get a bit of a rate cut.  Shoot me a zip.