ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: RJkick on February 09, 2012, 08:35:01 AM
-
Is there any way to adjust the alignment of the driver's door? When I open it the door goes down about an inch so when I close it I have to use a little more pull to get it back up. The hinge bolts seemed tight when I tried to retighten them. Is the hinge pulling away from the vehicle at this point? Is it common? Any suggestions on a direction to go in?
My next step is to take the fender off to get a really good look at it.
Any suggestions are appreciated Thanks
-
My next step is to take the fender off to get a really good look at it.
Thats what I had to do to get it back in line.
-
Mine did this and the bolts were pulling through the sheet metal. we had to weld in some support material and new anchor nuts.
Zig