ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: SNJSamurai on February 15, 2012, 06:56:24 PM

Title: Carb Question for 1.6 8v swap
Post by: SNJSamurai on February 15, 2012, 06:56:24 PM
Im in the process in finishing my 1.6 swap in my samurai.

I used the 1.3 intake manifold and I am wondering if a Weber Carb would be a waist of money and I should just keep the stock 1.3 carb?


Thanks



Title: Re: Carb Question for 1.6 8v swap
Post by: rbparker on February 15, 2012, 08:19:29 PM
I use the weber carb with the same set up. I bought a jet pac and tuned it. It gets into the power band by 1900 rpm and keeps building until 4500 rpm. I do have a torque cam and it runs much smother than the 1.3.
Title: Re: Carb Question for 1.6 8v swap
Post by: Boxcar on February 17, 2012, 08:05:29 AM
There is allways this one.
http://www.ebay.com/itm/New-75-76-Toyota-Corolla-1-6-1600-2BBL-Carburetor-/270916269342?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ACorolla&vxp=mtr&hash=item3f13de351e (http://www.ebay.com/itm/New-75-76-Toyota-Corolla-1-6-1600-2BBL-Carburetor-/270916269342?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ACorolla&vxp=mtr&hash=item3f13de351e)
 Advantages:
Nearly a direct fit,( no adapters)
Works well off angles, ( Unlike the Weber)
Stock air box,
Jetted for the 1600,
Ultra simple to tune ,
At $95 , less than half the cost of the Weber,
Great low end gains ,
Better economy than the Weber
Noticeable top end gains.
E, choke.....
....Boxcar...
Title: Re: Carb Question for 1.6 8v swap
Post by: Rhinoman on February 18, 2012, 02:43:56 PM
The Weber will give a lot more power, the stock 1.3 carb is quite restrictive on the 1.3 and more so on the 1.6.
Title: Re: Carb Question for 1.6 8v swap
Post by: SNJSamurai on March 15, 2012, 01:15:57 AM
Sorry about the really late replies guys. School, Work, Etc.

I read on ACKs about the toyota carb but it was a little confusing. Is there a better explanation?


Thanks
Title: Re: Carb Question for 1.6 8v swap
Post by: bentparts on March 20, 2012, 04:25:58 AM
Why didn't you use the fuel injection that came with the engine?
Title: Re: Carb Question for 1.6 8v swap
Post by: Boxcar on March 20, 2012, 09:22:11 AM
What do you need to know about the Toyota swap?
Ask and you will receive...Boxcar...
Title: Re: Carb Question for 1.6 8v swap
Post by: GO_OUTSIDE! on August 17, 2012, 05:21:59 AM
Boxcar, I sent you a PM.
I am very much interested in putting a corolla carb on a 1.6L 8V in my Samurai. Actually I would like to put it on my 1.3L until I can find a 1.6L and then do a full swap. Is that a possibility?
Title: Re: Carb Question for 1.6 8v swap
Post by: GO_OUTSIDE! on August 17, 2012, 05:32:54 AM
I found these on ebay (http://www.aaaaautomotive.com/Items/64-9249?&caSKU=64-9249&caTitle=New%2071%2072%20Corolla%201.6L%20Remanufactured%202BBL%20Carburetor)
Will it work or does it have to be a 1976 77 carb? They are both for the 2TC engine.
Title: Re: Carb Question for 1.6 8v swap
Post by: GO_OUTSIDE! on August 19, 2012, 02:29:06 PM
I found a '76 2tc carb on ebay. Its on its way, any help would be appreciated.